 |
|
Site Menu |
Copyright© 2005-07 by M & M Furs, Inc. All Rights Reserved Web Site by Hawk Mountain Designs |
Trap Modification Supplies |
Trap Parts 3 |
Modification Supplies 2 |
Base Plates Base Plates keep the trap’s frame from bowing when using strong springs or 4-coils. They also keep hard-fighting animals from bending the frame, welding, bolting or riveting required. D-ring included. |
Fits 1½ Montgomery, Northwoods, Victor, Duke & Bridger 1.65 & 1¾ Northwoods $1.15 - Each |
The following baseplates are 3/16" thick with a centered D-ring |
Fits #2 Victor & Duke, 1.75 Victor Old Style with ¾" Baseplate $1.20 - Each |
Fits #2 Montgomery, Northwoods & Bridger #2 and #5 $1.25 - Each |
Fits #3 and #4 Coilspring Traps $1.30 - Each |
Fits #3 Longspring Traps $1.35 - Each |
Fits #4 Longspring Traps $1.40 - Each |
The following baseplates are 1/8" thick with a centered D-ring. |
Fits #1½ Montgomery, Northwoods, Victor, Duke & Bridger 1.65 & 1¾ Northwoods. $1.10 - Each |
Fits #2 Victor & Duke, 1.75 Victor Old Style with ¾" Baseplate $1.15 - Each |
Fits #2 Montgomery, Northwoods & Bridger #2 and #5 $1.20 - Each |
Fits #3 and #4 Coilspring Traps $1.25 - Each |
Fits #3 Longspring Traps $1.30 - Each |
Fits #4 Longspring Traps $1.35 - Each |
Pre-Formed Lamination Kits These kits are used to widen and strength of traps jaws to helps prevent foot damage and package of 24, 3/16 rods to kit for one dozen traps. Just clamp and weld on. Select Kit from drop down menu after pressing the Buy button. |
Kit LK1 - 3¾" Fits #1½ & #2 Round Jaw Coilsprings Kit LK2 - 3½" Fits #1¾ Northwoods Round Jaw Coils Kit LK3 - 3" Fits 1.75 Round Jaw Victor Coils Kit LK4 - 3" Fits 1½ & 1¾ Square Jaw Coils Kit LK5 - 5" Fits #3 Roundjaw Coils & #3 Double Longsprings Kit LK6 - 3½" Fits #2 Square Jaw Coils Kit LK7 - 4" Fits #3 & #4 Square Jaw Coils Kit LK8 - 5¾" Fits #4 Double Longsprings Kit LK9 - 7" Fits #5 Bridger Double Longsprings |
$7.95 - Pack of 24 |
M & M 4-Coil Kits Use the drop down menu on the Buy button to order the following kits. Kit 1 - Fits 1½" Montgomery Kit 2 - Fits 2" Montgomery Kit 3 - Fits 3" Montgomery Kit 4 - Fits 4" Montgomery Kit 5 - Fits 2 Montgomery & Bridger, 2-7/8 Rd Kit 6 - Fits 1½ NW, 1¾ Rd & Sq & Victor 1.75 Kit 7 - Fits 2NW & Bridger 2 , 2½ Kit 8 - Fits 3NW & Bridger Kit 9 - Fits 1¾ Br. Victor & Duke, 2 Victor (Rd), Montgomery & NW Narrow Pin Kit 10 - Fits 1½ Victor Rd, Victor ½, SC & Duke Kit 11 - Fits 2 Victor & Herters Sq Kit 12 - Fits 3 Victor Sq, low lever wide pin & Bridger Kit 13 - Fits 3 Victor Rd & Sq & 3 SC high lever |
$1.75 - Kit $21.00 - Dozen Kits |
Taos Lightening Spring A double torsion spring made of music spring wire and heat tempered to eliminate breakage. Made for easy application at a very reasonable cost that will improve the power of your old or new coil spring trap. The extra power and speed you need without overdoing it. The 4-coil system is the only way to go. Includes coil spring, spring lock, and longer spring pin. Select Kit number below from the drop down menu on the Buy button. |
Kit 1 - Fits ½” Montgomery Kit 2 - Fits 2” Montgomery Kit 3 - Fits 3” Montgomery Kit 4 - Fits 4” Montgomery Kit 5 - Fits 2 Montgomery and Bridger 2 7/8 Rd Kit 6 - Fits 1½ NW, 1¾ Rd & Sq & Victor 1 .75 Kit 7 - Fits 2 NW & Brid 2 2 1/2 Kit 8 - Fits 3 NW & Bridger Kit 9 - Fits 1¾ Br. Victor & Duke, 2 Victor (Rd), Montgomery and NW (Narrow Pin) Kit 10 - Fits 1½ Victor Rd, Victor 1½ SC and Duke Kit 11 - Fits 2 Victor and Herter (Sq) Kit 12 - Fits 3 Victor (Sq) low lever wide pin & Bridger Kit 13 - Fits 3 Victor Rd & Sq & 3 SC (High Lever) |
$21.50 - Dozen Kits |
P.O. Box 36, Howard, SD 57349 • Phone (605) 772-5108 |